Rebar weight calculator
Work out the weight of reinforcing bars from size, number and length: metric bars from 8 to 40 mm by the d²/162 rule or the BS 4449 nominal mass, and ASTM A615 #3 to #11 bars by their nominal weights. Totals in kg, tonnes and pounds, with the working, a printable report, a PDF and a CSV.
Step-by-step working
Indicative only, not a design. The results follow the methods and clauses set out below and depend on your inputs. Check them against the project drawings, specifications and the code edition and national annex adopted for the project.
How we calculate
1. Mass per metre
- Metric bars, d²/162 rule: w = d²/162 kg/m, with d the nominal diameter in mm. The derivation is set out in the guide below.
- Metric bars, exact: w = 7,850 × πd²/4 × 10⁻⁶ kg/m. This is the basis of the nominal masses in BS 4449 [1]; the published table values can differ in the third decimal because the standard rounds the nominal area first.
- ASTM bars: the nominal weight in lb/ft from ASTM A615/A615M Table 1 [2], converted with 1 lb/ft = 1.488164 kg/m.
2. Totals
- For each line: total length Σl = number of bars × length of each bar, and mass = w × Σl. Lengths in feet are converted at 1 ft = 0.3048 m.
- Net mass is the sum of the lines. The mass to order or schedule is the net mass × (1 + allowance/100). Tonnes are kg/1,000 and pounds are kg × 2.204623.
- Print gives a one-document report with inputs, results, working, date and disclaimer. Download PDF builds the same report as a PDF in your browser; nothing is sent to us. Download CSV gives the numbers for a spreadsheet.
What the calculator does
Reinforcement is scheduled, priced and checked by weight, so a quick and traceable kg figure is useful at every stage: a first quantity for an RC versus PT comparison, a check of a bar bending schedule, or a sense check of the rebar in a design we are reviewing. This calculator takes up to six lines of bars, each with a size, a number of bars and a length, and returns the weight per line and in total.
It covers the metric sizes used across the UAE and the wider GCC, from 8 mm to 40 mm, and the ASTM A615 inch-pound sizes from #3 to #11 that appear on projects designed to US practice.
Where d²/162 comes from
A bar of diameter d mm has a cross-sectional area of πd²/4 mm². One metre of it has a volume of πd²/4 × 10⁻⁶ m³. Steel weighs about 7,850 kg/m³, so the mass per metre is:
w = 7,850 × π/4 × 10⁻⁶ × d² = 0.0061654 × d² ≈ d²/162.2 kg/m
Rounding 162.2 to 162 gives the rule we all learnt on site: a 12 mm bar weighs 144/162 = 0.889 kg/m and a 16 mm bar 256/162 = 1.580 kg/m. The rule is about 0.15% heavier than the exact figure, which is well inside normal rolling tolerances, so it is fine for estimates and quick checks. Choose the exact option to match the BS 4449 nominal masses [1].
Bar tables
| Bar | Area (mm²) | d²/162 (kg/m) | 7,850 kg/m³ (kg/m) | 12 m bar (kg) |
|---|---|---|---|---|
| 8 mm | 50.3 | 0.395 | 0.395 | 4.74 |
| 10 mm | 78.5 | 0.617 | 0.617 | 7.40 |
| 12 mm | 113.1 | 0.889 | 0.888 | 10.65 |
| 14 mm | 153.9 | 1.210 | 1.208 | 14.50 |
| 16 mm | 201.1 | 1.580 | 1.578 | 18.94 |
| 18 mm | 254.5 | 2.000 | 1.998 | 23.97 |
| 20 mm | 314.2 | 2.469 | 2.466 | 29.59 |
| 22 mm | 380.1 | 2.988 | 2.984 | 35.81 |
| 25 mm | 490.9 | 3.858 | 3.853 | 46.24 |
| 28 mm | 615.8 | 4.840 | 4.834 | 58.00 |
| 32 mm | 804.2 | 6.321 | 6.313 | 75.76 |
| 36 mm | 1,017.9 | 8.000 | 7.990 | 95.88 |
| 40 mm | 1,256.6 | 9.877 | 9.865 | 118.38 |
ASTM sizes use the nominal values published in ASTM A615/A615M Table 1 [2]. The number in brackets is the soft-metric designation used in A615M.
| Bar (metric no.) | Diameter in / mm | Area in² / mm² | lb/ft | kg/m |
|---|---|---|---|---|
| #3 (10) | 0.375 / 9.5 | 0.11 / 71 | 0.376 | 0.560 |
| #4 (13) | 0.500 / 12.7 | 0.20 / 129 | 0.668 | 0.994 |
| #5 (16) | 0.625 / 15.9 | 0.31 / 200 | 1.043 | 1.552 |
| #6 (19) | 0.750 / 19.0 | 0.44 / 284 | 1.502 | 2.235 |
| #7 (22) | 0.875 / 22.2 | 0.60 / 387 | 2.044 | 3.042 |
| #8 (25) | 1.000 / 25.4 | 0.79 / 510 | 2.670 | 3.973 |
| #9 (29) | 1.128 / 28.7 | 1.00 / 645 | 3.400 | 5.060 |
| #10 (32) | 1.270 / 32.3 | 1.27 / 819 | 4.303 | 6.404 |
| #11 (36) | 1.410 / 35.8 | 1.56 / 1,006 | 5.313 | 7.907 |
How to use it
- Pick the metric method (the d²/162 rule or the exact 7,850 kg/m³ basis) and the length unit.
- For each line, choose the bar size and enter the number of bars and the length of one bar. For a bar bending schedule, use the cutting length of each bar mark.
- Add an allowance if you want an order quantity rather than the net scheduled mass.
- Read the totals, then use Print, Download PDF or Download CSV to keep the calculation with your file.
Assumptions and limitations
- Masses are nominal. Actual bar mass varies within the tolerances of the product standard, so weighbridge figures will not match exactly.
- The calculator does not add laps, bends or hooks for you. Use cutting lengths that already include them, for example from a schedule prepared to BS 8666 [3], or use the allowance field.
- The allowance is a single percentage you choose. It is not a recommendation; agree it with whoever orders the steel.
- Coated or stainless bars have slightly different densities and are not covered.
For a first look at slab quantities, try the RC vs PT slab calculator and the concrete volume calculator. For laps and anchorage, see the development length calculator (ACI 318) and the lap length calculator (Eurocode 2).
References
The codes and standards the calculator follows, consulted on 15 November 2026. Clause numbers are given so you can check each step; always use the edition and national annex adopted for your project.
- BSI: BS 4449:2005+A3:2016 Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification (nominal sizes, cross-sectional areas and mass per metre)
- ASTM International: ASTM A615/A615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement, Table 1 (bar designations, nominal weights, diameters and areas)
- BSI: BS 8666:2020 Scheduling, dimensioning, cutting and bending of steel reinforcement for concrete. Specification
Part of our free engineering tools and design guides. Codes are referred to by clause where we are confident of the reference; always check the edition and national annex adopted for your project.
Questions we are asked about this.
How do you calculate rebar weight per metre?
Square the bar diameter in mm and divide by 162. A 10 mm bar is 100/162 = 0.617 kg/m, a 20 mm bar 400/162 = 2.469 kg/m and a 32 mm bar 1,024/162 = 6.321 kg/m. The rule comes from the density of steel, about 7,850 kg/m³, multiplied by the bar area.
Why does d²/162 differ slightly from the BS 4449 table?
The exact factor is 162.2, so d²/162 comes out about 0.15% heavier. BS 4449 lists nominal masses based on 7,850 kg/m³ and a rounded nominal area, so its figures can differ in the third decimal. Choose the exact option to match the standard.
What is the weight of a 12 m bar?
A 12 m length weighs 12 times the mass per metre: about 10.7 kg for 12 mm, 18.9 kg for 16 mm, 29.6 kg for 20 mm and 46.2 kg for 25 mm on the 7,850 kg/m³ basis. The bar table on this page lists every size.
Can I use it for ASTM #4 or #5 bars?
Yes. Choose the # size from the ASTM group. The calculator uses the nominal weight in lb/ft from ASTM A615 Table 1 and gives the result in kg, tonnes and pounds. Enter lengths in feet or metres.
Does the result include laps and wastage?
Only if you include them. Enter cutting lengths that already include laps and bends, or add a percentage in the allowance field. The calculator does not assume an allowance.
Can I print or save the results?
Yes. Print gives a clean report with the inputs, results, working, date and disclaimer. Download PDF creates the same report as a PDF in your browser, and Download CSV gives the figures for a spreadsheet. Nothing is uploaded to our server.
Send the drawings. Get an answer from our engineers.
WhatsApp or email the architectural or structural set, the location and what you need. The reply comes from the engineers who will do the work, with a proposed scope and programme.
- +971 52 118 2569
- Telephone
- +971 52 118 2569
- Office
- Al Warqa 1, Dubai, UAE
- Hours
- Sunday – Thursday, 09:00 – 18:00 GST
