1. Home
  2. Tools
  3. Tile calculator
Free tool  ·  Indicative  ·  Iron Axis engineering team

Tile calculator: floor and wall tiles, wastage and boxes

Find how many tiles you need for a floor or a wall. Enter the area in metres or feet, deduct openings, add your own wastage and see the number of tiles and boxes to buy. The working is shown step by step, with a printable report, a PDF and a CSV.

Engineering disclaimer. This free tool is for preliminary checks and education only. It uses simplified code methods and your inputs, and it is not a substitute for project design. Results must be verified by a qualified structural engineer responsible for the project. Verify every result against the current code edition, national annex, authority requirements and the project drawings before use. Iron Axis accepts no liability for decisions or designs based on these results. Read the full disclaimer.
1. Area
Length of the floor or wall.
Width of a floor, or height of a wall.
Same-size rooms or wall panels.
Leave 0 if none. Deduct only openings that will not be tiled.
2. Tile size, wastage and boxes
Face size of one tile, not including the joint.
Your allowance for cuts and breakage. 10% is a common starting point for a straight layout; use more for a diagonal or a small, cut-heavy room.
From the pack, or leave 1 to see only the tile count.
—
Step-by-step working

Indicative only, not a design. The results follow the methods and clauses set out below and depend on your inputs. Check them against the project drawings, specifications and the product data sheets you will actually use.

How we calculate it

Net area is the length times the width of each space, times the number of identical spaces, minus the openings you deduct. The number of tiles before wastage is that net area divided by the face area of one tile. We then apply your wastage percentage and round up to a whole tile, then to a whole number of boxes.

The default example is a 4 m × 3 m floor (12 m²) tiled with 600 × 600 mm tiles and 10% wastage: 12 / 0.36 = 33.33 tiles, × 1.10 = 36.67, so 37 tiles. In boxes of four that is 10 boxes, with three spare tiles in the last box.[1]

What the calculator does

People looking for a tile calculator usually want one number: how many tiles, or how many boxes, for a room they already know the size of. This tool starts from that area, deducts openings, applies the wastage you choose, and rounds up to the boxes your supplier actually sells.

It works in metres or feet, and in millimetre, centimetre or inch tile sizes, which covers the wording people search for in the UAE, India and Saudi Arabia — “tile calculator square meters”, “tile calculator square feet”, “how many tiles do I need for my bathroom”. The result is a take-off, not a setting-out.

How to use it

  1. Choose metres or feet and enter the length and width of the floor, or the length and height of the wall. If several rooms are the same size, enter how many.
  2. Deduct doors, windows or a stair opening if those areas will not be tiled. Leave the openings box at 0 if none apply.
  3. Enter the face size of one tile and the number of tiles in a box, from the pack.
  4. Set your own wastage. We leave this in your hands: 10% is a common starting point for a straight layout on a simple rectangle; 15% is often used for a diagonal, herringbone or a room with many cuts.
  5. Read the tiles and boxes to buy, then use Print, Download PDF or Download CSV to keep the take-off.

Assumptions and limitations

  • The count is an area ratio. It does not lay tiles on a grid, so raking cuts, staggered joints, niches, movement joints and a wide grout joint can change the number.[2]
  • Wastage is an allowance you type in. It is not a recommendation, and it is not in a code of practice.
  • Openings are deducted only if you enter them. We do not assume a door or window size.
  • The box count uses the tiles-per-box figure you enter. Pack sizes vary by brand and size, so check the box in front of you.

Related quantities

Once the floor area is fixed, the same envelope is often painted. Use the paint calculator for walls minus openings. For a first look at the cost of the building that holds those finishes, try the construction cost per sq ft estimator, which uses published 2025 typologies for the UAE, India and KSA. Slab and screed volumes sit in the concrete volume calculator.

References

The codes and references the calculator follows, consulted on 17 November 2026. Always use the edition, data sheet or report you will actually rely on.

  1. Worked example (this page): A 4 m × 3 m floor, 600 × 600 mm tiles, 10% wastage: 12 / 0.36 = 33.33 tiles, × 1.10 = 36.67, rounded up to 37 tiles.
  2. Setting-out reminder: The calculator does not place tiles on a grid. Always check the count against the setting-out and the tile size actually delivered.

Part of our free engineering tools and design guides. Figures and clauses are referred to where we are confident of the reference; always check the edition, data sheet or report adopted for your project.

S-611 FAQ

Questions we are asked about this.

How many tiles do I need for a 4 m × 3 m room?

For 600 × 600 mm tiles and 10% wastage, 37 tiles (10 boxes of four). The net area is 12 m², each tile is 0.36 m², so 12 / 0.36 = 33.33 tiles before wastage, and 33.33 × 1.10 = 36.67, which rounds up to 37.

Should I use 10% or 15% wastage?

There is no code figure. 10% is a common starting point for a straight layout on a simple rectangle. Use a higher allowance for a diagonal or herringbone pattern, a small room with many cuts, or a lot of niches. You can type any value from 0 to 40%.

Does the calculator work in square feet?

Yes. Switch the room units to feet and, if you prefer, the openings to ft². Tile sizes can be entered in inches, millimetres, centimetres or metres. The result is shown in both m² and ft².

How many tiles do I need for a wall?

Enter the wall length and the wall height, deduct windows and doors in the openings box, and use the same wastage and box size as for a floor.

Can I print or save the results?

Yes. Use Print for a one-page sheet, Download PDF for a file, or Download CSV for a spreadsheet of the inputs, the take-off and the working.

S-901 Contact

Send the drawings. Get an answer from our engineers.

WhatsApp or email the architectural or structural set, the location and what you need. The reply comes from the engineers who will do the work, with a proposed scope and programme.

Office
Al Warqa 1, Dubai, UAE
Hours
Sunday – Thursday, 09:00 – 18:00 GST