1. Home
  2. Post tension UAE
  3. Fujairah
Fujairah  ·  East coast

Post tension design in Fujairah

PT design review, optimisation, preliminary design support, full PT design packages, and site supervision and stressing support for buildings in Fujairah and on the UAE's east coast, with the seismic and coastal checks that sites on the Gulf of Oman need.

Design codes
ACI 318 · Eurocode 2 · PTI
Experience
15 years · UAE · KSA · Qatar · India
S-761 Fujairah

PT on the east coast.

Fujairah is the UAE's east coast emirate, between the Hajar mountains and the Gulf of Oman. Its projects include residential and mixed-use buildings in Fujairah city, hotels and resorts along the coast, and port-related, logistics and industrial buildings. Post-tensioning is used for the same reasons as elsewhere: thinner floors, longer spans and fewer columns. But two site conditions shape the design more than they do in Dubai.

Seismic demand

The north-east of the UAE is closer to active seismic sources such as the Dibba fault and the Oman mountain front. Published probabilistic seismic hazard studies place Fujairah, and especially the Dibba area to the north, above Dubai and Abu Dhabi. For a PT flat slab, that can raise the seismic design category, and the slab-column connections then have to be checked for the design drift even when the slab is not part of the lateral system. That can add shear reinforcement at columns that pass the gravity check, so we check it at scheme stage.

Coast and rock

Sites on the Gulf of Oman see chloride exposure and humid, salty air, which drive cover, crack control and the protection of anchorages and tendons (see bonded vs unbonded post-tensioning). Inland, sites against the mountains often have rock close to the surface and stepped levels, which brings split-level slabs, retaining walls and changes in restraint into the slab design.

S-762 Authorities

Fujairah Municipality.

Fujairah Municipality regulates urban planning and land use in the emirate and audits building designs against its regulations, and building permits are applied for through its e-services. Plots in the Fujairah Free Zone or under other local authorities may follow their own approval route, so we confirm the authority for the plot at kick-off.

Fujairah publishes less detailed structural guidance online than some other emirates, so we confirm the governing code, the seismic basis and the format of the structural submission with the consultant of record at the start. ACI 318 with PTI guidance is our standard design basis. Submissions are made through the consultant of record.

S-763 Services

What we do on Fujairah projects.

Our post-tension services in Fujairah

  • PT design review: a check of the PT design against ACI 318 and the project specification, including the seismic drift check at slab-column connections.
  • PT design optimisation: slab thickness and tendon layout optimised once the seismic category and exposure are fixed, so savings are not lost to late changes.
  • Preliminary design support: concept slab depths and grids with the seismic category and exposure class established at the start.
  • Full PT design package: calculation report, tendon layouts, profiles, anchorage details and stressing schedules in the consultant's format.
  • Site supervision: pre-pour inspections of tendon profiles, cover and anchorage protection, arranged in the scope.
  • Stressing support: stressing sequence, calculated elongations and record review.

Technical focus in Fujairah

Stepped sites and split levels change how a slab is restrained; see shrinkage and creep in PT slabs. Long spans in hotels and public areas need a serviceability check, covered in long-term deflection, Eurocode vs ACI and floor vibration in PT slabs. Anchorage protection and bursting steel at slab edges are covered in anchorage zone and bursting reinforcement.

S-764 How we work

Delivered from Dubai.

Design and review are delivered from our office in Al Warqa 1, Dubai. Site visits to Fujairah and the east coast are planned in the scope around the pour and stressing programme.

Who does the work: our engineering team brings 15+ years of post-tension design and site experience across the GCC and is led by our Lead Engineer, Mohamed Shahid. PT slabs are analysed and designed in RAM Concept, with calculations referenced clause by clause to the governing code.

S-768 FAQ

Questions about post tension design in Fujairah.

Is seismic design more important in Fujairah than in Dubai?

Yes. Published probabilistic seismic hazard studies place Fujairah, and especially the Dibba area, above Dubai and Abu Dhabi. We check the seismic design category before fixing the floor system.

What does the seismic category change in a PT flat slab?

In the higher categories, slab-column connections must be checked for the design drift even when the slab is not part of the lateral system, which can add shear reinforcement at columns.

Who approves building designs in Fujairah?

Fujairah Municipality audits building designs and issues building permits; free zone plots may follow their own route. Submissions are made by the consultant of record.

Which code do you use for PT slabs in Fujairah?

ACI 318 with PTI guidance is our standard basis; we confirm the governing code and seismic basis with the consultant at kick-off.

How do you handle coastal exposure on the east coast?

Exposure class, cover, crack control and tendon and anchorage protection are set at scheme stage, because cover changes the usable tendon drape and with it the prestress.

Do you work in Dibba, Khor Fakkan and Kalba?

Yes. We serve projects along the east coast; the authority depends on the plot, and we confirm it at kick-off.

S-901 Contact

Send the drawings. Get an answer from our engineers.

WhatsApp or email the architectural or structural set, the location and what you need. The reply comes from the engineers who will do the work, with a proposed scope and programme.

Office
Al Warqa 1, Dubai, UAE
Hours
Sunday – Thursday, 09:00 – 18:00 GST