Paint calculator: walls, openings, coats and coverage
Find how much paint you need for a room. We take the wall area, deduct doors and windows, add the ceiling if you want it, multiply by the number of coats and divide by the coverage you enter. The typical default of 17 m² per litre is taken from a published data sheet and is there for you to edit.
Step-by-step working
Indicative only, not a design. The results follow the methods and clauses set out below and depend on your inputs. Check them against the project drawings, specifications and the product data sheets you will actually use.
How we calculate it
The wall area of a rectangular room is 2 × (length + width) × height. We deduct the door and window areas you enter, optionally add the ceiling, multiply by the number of identical rooms and by the number of coats, and divide by the coverage in m² per litre. Tins are rounded up to a whole tin of the size you enter.
The default example is a 5 m × 4 m room, 3 m high, one 2 m × 1 m door and one 1.5 m × 1.2 m window, two coats at 17 m²/L: wall area 54 m², openings 3.8 m², net 50.2 m², paint 50.2 × 2 / 17 = 5.91 L, which is three 2.5 L tins.[2]
What the calculator does
Searches such as “paint calculator square meters”, “paint calculator jotun”, “how much paint do I need for a bedroom” and “paint calculator for walls” all point to the same arithmetic: painted area, times coats, divided by coverage. This tool does that sum, with doors and windows taken off, in metres or feet.
Coverage is the number that changes the result most, and it is not a universal constant. We therefore start from a published manufacturer figure and label it so you can replace it.
The typical default, and why it is editable
The default coverage is 17 m² per litre. That is the “up to” practical coverage published on the Dulux Trade Vinyl Matt technical data sheet, issued August 2017, for normal conditions on interior walls and ceilings.[1] The same sheet describes two full coats as the normal finishing process, except when recoating a similar colour in good condition.
It is a typical default, not a recommendation for every paint. Jotun, Asian Paints, Berger and other manufacturers publish their own spreading rates. Textured plaster, masonry, a dark-to-light colour change and a very absorbent surface all use more paint than a smooth, sealed wall. Enter the value from the data sheet you will actually buy, in m² per litre.
How to use it
- Choose metres or feet and enter the room length, width and wall height. If several rooms are the same size, enter how many.
- Enter the number, width and height of doors and windows to deduct. Set the number to 0 if a room has none.
- Tick the ceiling box if you will paint it as well.
- Set the number of coats, the coverage from your data sheet, and the tin size you will buy.
- Read the litres required and the tins to buy, then print or download the take-off.
Assumptions and limitations
- Rooms are rectangular, with a constant wall height. Alcoves, sloped ceilings and bulkheads need their own take-off, or a conservative extra allowance in the coverage box.
- Primer, sealer, putty and woodwork (doors, frames, skirting) are not included unless you add their area yourself.
- The default 17 m²/L is an “up to” figure. Real coverage on site is often lower.
- Tin rounding is arithmetic. Confirm pack sizes with the supplier; some decorative ranges in the Gulf are sold in 18 L pails rather than 10 L tins.
Related quantities
If you are also tiling the wet areas, use the tile calculator. For a first look at building cost in the UAE, India or KSA, use the construction cost per sq ft estimator.
References
The codes and references the calculator follows, consulted on 17 November 2026. Always use the edition, data sheet or report you will actually rely on.
- AkzoNobel / Dulux Trade: Dulux Trade Vinyl Matt technical data sheet, issued 08/17: practical coverage “up to 17 m² per litre” under normal conditions; normal finishing process is two full coats (one coat may be enough when recoating a similar colour in good condition).
- Worked example (this page): A 5 m × 4 m × 3 m room, one 2 × 1 m door and one 1.5 × 1.2 m window, two coats at 17 m²/L: net area 50.2 m², paint 5.91 L, three 2.5 L tins.
Part of our free engineering tools and design guides. Figures and clauses are referred to where we are confident of the reference; always check the edition, data sheet or report adopted for your project.
Questions we are asked about this.
How much paint do I need for a 5 m × 4 m room?
For 3 m walls, one 2 × 1 m door, one 1.5 × 1.2 m window, two coats and 17 m²/L, 5.91 L, which is three 2.5 L tins if you do not paint the ceiling. Including the 20 m² ceiling raises it to 8.26 L, or four 2.5 L tins. Change the coverage to the figure on your data sheet.
Why is the default 17 m² per litre, and can I change it?
Yes, please change it. 17 m²/L is the “up to” practical coverage published on the Dulux Trade Vinyl Matt data sheet (issued August 2017). It is a typical default only. Enter the spreading rate from the Jotun, Asian Paints, Berger or other data sheet for the product you will use.
How many coats of paint do I need?
Most wall emulsions, including the data sheet we cite, take two full coats as the normal finishing process. One coat may be enough when recoating a similar colour in good condition. Primer, if the surface needs it, is a separate coat and a separate quantity.
Does the calculator work in square feet?
Yes. Switch the units to feet and enter the room and opening sizes in feet. Coverage stays in m² per litre, which is how most Gulf and UK data sheets print it. The painted area is also shown in ft².
Can I print or save the results?
Yes. Use Print, Download PDF or Download CSV. The report lists the room, the openings, the coverage you used and the step-by-step working.
Send the drawings. Get an answer from our engineers.
WhatsApp or email the architectural or structural set, the location and what you need. The reply comes from the engineers who will do the work, with a proposed scope and programme.
- +971 52 118 2569
- Telephone
- +971 52 118 2569
- Office
- Al Warqa 1, Dubai, UAE
- Hours
- Sunday – Thursday, 09:00 – 18:00 GST
