Structural unit converter: kN to kg, MPa to psi and more
Convert the units engineers mix up most: kN to kg (kgf), kN/m² to kg/m², MPa to psi, kN/m to kg/m, kN·m to kip·ft and kN/m³ to kg/m³. Every conversion uses exact definitions and standard gravity, shows the factor and lists the value in every unit of that kind.
Step-by-step working
Indicative only. Conversions use exact definitions; check which units your code and software expect.
How we calculate
1. Exact base definitions
- Standard gravity g = 9.80665 m/s², so 1 kgf = 9.80665 N and 1 tonne-force = 9.80665 kN [1].
- The international pound and foot: 1 lbf = 4.4482216152605 N, 1 in = 25.4 mm, 1 ft = 0.3048 m [2]. Psi, psf, lb/ft, kip·ft and pcf are built from these, so no rounded factor is ever chained.
2. Conversion
- The value is turned into the SI base unit of its kind (N, Pa, N/m, N·m, N/m³, m or m²), then divided by the factor of the target unit. The table repeats this for every unit in the category.
- Mass-based units such as kg/m² or kg/m³ are treated as weights under standard gravity, which is how they are used on drawings and in load tables.
kN to kg: the conversion engineers search most
A kilonewton is a force; a kilogram is a mass. When a drawing or a supplier says a load is “500 kg”, it means the weight of 500 kg under gravity, the kilogram-force. With standard gravity, 1 kN = 1,000 / 9.80665 = 101.97 kgf, and 1 kgf = 9.80665 N [1]. The common site shortcut of 1 kN ≈ 100 kg is about 2% low, which is fine for a quick check and not for a calculation.
kN/m² to kg/m² and other area loads
Floor loads are given in kN/m² (kPa) in Eurocode and in most Gulf specifications, in kg/m² on many architectural and supplier sheets, and in psf in US codes. 1 kN/m² = 101.97 kg/m² = 20.885 psf. For example, a 5 kN/m² live load is about 510 kg/m² or 104 psf. Our slab load calculator shows every line of a load build-up in all three units.
MPa, N/mm² and psi for concrete and steel
1 MPa is exactly 1 N/mm², and equals 145.04 psi. Concrete C30 (fck = 30 MPa) is about 4,350 psi; Grade 420 rebar (fy = 420 MPa) is about 60,900 psi, which is why it is called Grade 60 in US units. Older drawings in kg/cm² convert with 1 kg/cm² = 0.0981 MPa, so 300 kg/cm² is about 29.4 MPa.
Line loads, moments and unit weights
- Line load: 1 kN/m = 1 N/mm = 101.97 kg/m = 68.52 lb/ft.
- Moment: 1 kN·m = 0.7376 kip·ft = 8.851 kip·in = 0.10197 tf·m.
- Unit weight: 1 kN/m³ = 6.366 pcf. Reinforced concrete at 25 kN/m³ [3] corresponds to a mass density of about 2,550 kg/m³.
Moment and line-load conversions feed straight into our continuous beam calculator and RC beam design calculator, which work in kN, m and kN·m.
References
The codes and texts the calculator follows, consulted on 19 November 2026. Always use the edition and national annex you will actually rely on.
- BIPM: The International System of Units (SI Brochure), standard acceleration of gravity gn = 9.80665 m/s²
- NIST: Special Publication 811, Guide for the Use of the International System of Units, Appendix B conversion factors
- CEN: EN 1991-1-1:2002 Eurocode 1, Actions on structures, Part 1-1: Table A.1 (densities of concrete)
Part of our free engineering tools and design guides. Results are for preliminary design and checking, and must be verified by a qualified structural engineer responsible for the project. Clauses are referred to where we are confident of the reference; always check the edition and national annex adopted for your project.
Questions we are asked about this.
How many kg is 1 kN?
1 kN is the weight of 101.97 kg under standard gravity (1,000 / 9.80665). So 10 kN ≈ 1,020 kg and 100 kN ≈ 10.2 tonnes. Rounding to 100 kg per kN is about 2% off.
How do I convert kN/m² to kg/m²?
Multiply by 101.97. For example 2 kN/m² = 204 kg/m², and 5 kN/m² = 510 kg/m². To go back, divide kg/m² by 101.97.
Is 1 MPa equal to 1 N/mm²?
Yes, exactly. 1 MPa = 1 N/mm² = 145.04 psi. 1 kN/mm² = 1 GPa, the unit used for elastic modulus.
How do I convert kN·m to kip·ft?
Multiply kN·m by 0.73756. For example 100 kN·m = 73.8 kip·ft. To convert kip·ft to kN·m, multiply by 1.3558.
What is the difference between kg and kgf?
kg is mass. kgf (kilogram-force) is the weight of 1 kg under standard gravity, 9.80665 N. Loads written in “kg” on drawings almost always mean kgf.
How do I convert kN/m to kg/m?
Multiply by 101.97. 1 kN/m = 101.97 kg/m = 68.52 lb/ft. A 25 kN/m beam load is about 2,550 kg/m.
Send the drawings. Get an answer from our engineers.
WhatsApp or email the architectural or structural set, the location and what you need. The reply comes from the engineers who will do the work, with a proposed scope and programme.
- +971 52 118 2569
- Telephone
- +971 52 118 2569
- Office
- Al Warqa 1, Dubai, UAE
- Hours
- Sunday – Thursday, 09:00 – 18:00 GST
