1. Home
  2. Tools
  3. Steel weight calculator
Free tool  ·  Indicative  ·  Iron Axis engineering team

Steel weight calculator for plate, pipe, bar, box and angle

Work out the theoretical weight of MS plate, pipe, round, square, flat and hexagon bar, SHS/RHS box sections and angles in kg per metre, per piece and in total. Choose carbon steel, stainless, aluminium, brass or copper, add a price per kg if you like, and see the formula behind every number.

Engineering disclaimer. This free tool is for preliminary checks and education only. It uses simplified code methods and your inputs, and it is not a substitute for project design. Results must be verified by a qualified structural engineer responsible for the project. Verify every result against the current code edition, national annex, authority requirements and the project drawings before use. Iron Axis accepts no liability for decisions or designs based on these results. Read the full disclaimer.
Shape and material
Size
Plate: length of the sheet.
0 = not used. Any currency.
— total weight kg/m
Step-by-step working

Indicative only. Theoretical weights from nominal sizes; mill tolerances and corner radii change delivered weights.

How we calculate

1. Area of the cross-section

  • Plate and flat bar: b × t. Round bar: πd²/4. Square bar: a². Hexagon bar (across flats s): (√3/2)s².
  • Pipe or CHS: π t (D − t), the same as π/4 (D² − (D − 2t)²). Box (SHS/RHS): 2t (b + h − 2t). Angle: t (a + b − t). Hollow sections and angles are taken with square corners.

2. Weight

  • kg/m = A (mm²) × ρ (kg/m³) / 10⁶, then × length and × quantity. Carbon steel is taken at 7,850 kg/m³, the value EN 1993-1-1 §3.2.6 and EN 1991-1-1 Table A.4 use for steel [1][2].
  • Plates also show kg/m² = t (mm) × 7.85 for steel.

Steel weight formulas you can check by hand

All steel weight calculations are area × length × density. With ρ = 7,850 kg/m³, the shortcuts are:

  • Plate: kg = length (m) × width (m) × thickness (mm) × 7.85. A 3 m × 1.5 m × 10 mm MS plate weighs 3 × 1.5 × 10 × 7.85 = 353.25 kg (78.5 kg/m²).
  • Round bar: kg/m = d² × 0.006165 (d in mm), close to the rebar rule d²/162. A 16 mm bar is 1.578 kg/m.
  • Pipe: kg/m = 0.02466 × t × (D − t). A 114.3 × 6.02 mm pipe (4 in, Schedule 40) is 16.07 kg/m, which matches the ASME B36.10M table [3].
  • Box section: kg/m = 0.0157 × t × (b + h − 2t) for square corners.

Why delivered weight differs

Mill tolerances on thickness, the corner radii of hollow sections and the root radius of angles all move the real weight by a few per cent. Producers’ tables (for example EN 10210 and EN 10219 hollow sections) include the radii and should be used for orders and for structural design. This calculator is for estimating, quantity take-off and checking invoices.

Stainless steel and aluminium

Stainless 304 is about 1% heavier than carbon steel and 316 about 2%; aluminium is roughly one third. Choose the material and the calculator changes the density; select “Other” for any alloy with a known density.

For reinforcing bars by diameter and count, use our rebar weight calculator; for section stiffness and strength properties, use the moment of inertia calculator.

References

The codes and texts the calculator follows, consulted on 19 November 2026. Always use the edition and national annex you will actually rely on.

  1. CEN: EN 1993-1-1:2005 Eurocode 3: §3.2.6 design values of material coefficients for steel (ρ = 7,850 kg/m³)
  2. CEN: EN 1991-1-1:2002 Eurocode 1: Annex A, Table A.4 (construction materials, metals)
  3. ASME: ASME B36.10M Welded and Seamless Wrought Steel Pipe (dimensions and weights)

Part of our free engineering tools and design guides. Results are for preliminary design and checking, and must be verified by a qualified structural engineer responsible for the project. Clauses are referred to where we are confident of the reference; always check the edition and national annex adopted for your project.

S-691 FAQ

Questions we are asked about this.

How do you calculate the weight of an MS plate?

Weight (kg) = length (m) × width (m) × thickness (mm) × 7.85. For example 2.5 m × 1.25 m × 12 mm = 294.4 kg.

What is the density of steel in kg/m³?

Carbon and mild steel are taken as 7,850 kg/m³ (EN 1993-1-1). Stainless 304 is about 7,930 and 316 about 8,000 kg/m³.

How do I calculate the weight of a steel pipe per metre?

kg/m = 0.02466 × t × (OD − t), with t and OD in mm. A 168.3 × 7.11 mm pipe is 0.02466 × 7.11 × 161.19 = 28.3 kg/m.

What is the weight of a 10 mm steel plate per m²?

10 × 7.85 = 78.5 kg/m². Each millimetre of steel plate weighs 7.85 kg per square metre.

How do I find the weight of a square hollow section?

With square corners, kg/m = 0.00785 × 2t (b + h − 2t). A 100 × 100 × 5 SHS is 0.00785 × 10 × 190 = 14.9 kg/m by this formula; the producer’s EN 10219 table, which includes the corner radii, gives a little less.

Is the rebar formula d²/162 the same?

Yes, it is a rounded form of 7,850 × π/4 × d² / 10⁶ = d²/162.2 kg/m. Our rebar weight calculator uses both.

S-901 Contact

Send the drawings. Get an answer from our engineers.

WhatsApp or email the architectural or structural set, the location and what you need. The reply comes from the engineers who will do the work, with a proposed scope and programme.

Office
Al Warqa 1, Dubai, UAE
Hours
Sunday – Thursday, 09:00 – 18:00 GST